Handmade Bicycle Show - Part 2

Ok, so it took me a little bit longer than a day or two to write part 2... But no worries, I haven't forgotten.

I'm going to kick off this post with a review of an oft overlooked part from many mainstream bikes: fenders. Wood fenders were all the rage at the Handmade Bicycle Show this year, and its easy to see why. They are beautiful and stylish


These photos are of Inglis Cycles (from Napa, CA), Keith Anderson Cycles (from Grants Pass, OR), and DeSalvo Custom Cycles (from Ashland, OR), respectively. All have a slightly different style to their wood with graphic designs, inlays and custom stains. There were several others as well, including from Naked Bicycles and Design and Rich Adams.

Continuing down the component path, I talked last time about the slick new electronic shifter from Shimano. Well, SRAM's not about to be outdone by Shimano and they were showing off a slick new HammerSchmidt internal front gear from their Truvativ group. There's only one chainring on the front and the internal gears give you the feel of a higher gear. On the lower gear, the gear spins with a ratio of 1:1, shift it and the gear spins 1:1.6 (you pedal around once and the gear goes around 1.6 times). They had a demo bike set up and I can tell you, this was a really smooth gear and it would be GREAT in muddy or snowy environs.

The rep was explaining that once a year you do have to take the thing apart and regrease the gears (depending on how much much your ride through, I'm guessing), which seems like a lot of maintenance to me. But I suppose your shop could probably do this for you without too much of an extra charge. I'd hope, anyway. At about $700, this won't be cheap, but it was so slick that for a tour or race where flawless operation was required, I think this definitely could be worth the money.

Another cool bike/component combo (note the sequey back to bikes...) comes from Kimori from Japan, with their very unusual suspension system.


The bikes themselves don't have 26" wheels, so they look a little, um, delicate for someone of my, um, stature (I'm not a diminutive guy). But they are definitely interesting.



Finally, let's get back to those bikes with a few of my other favorites from the show:



Bilenky Bicycles who does a lot of tandems and tandem recumbents was showing a very slick long-wheel base utility bicycles. I'm partial to these to begin with, so its no surprised I liked it. KirkLee had a road bike that they had incorporated hand painted canvas onto the top layer of the carbon fiber. Up close it was easy to tell that it was canvas and it made for a very unusual and stylish appearance on the bike. It was really not like anything else at the show (in a very good way). And finally on the track bike side of things, Vanilla Bicycles was showing a couple of very cool Speedvagen track bikes that were so light, you would think they were carbon (but they weren't).

Again, lots more to see from show on my flickr.